How to Install a Van Window | Step-By-Step Guide | CR Laurence | Van Build Series

In our latest vlog, we walk step-by-step through our Sprinter van window installation for an OEM style window (CR Laurence Clamp Ring Style Window, in our case). Along the way we'll share some useful tips, which we hope will make your van window installation a little easier. Also, at the end of the video, we’ll discuss what we would do differently the next time we install a van window.

BELOW WE'VE INCLUDED A LIST OF TOOLS & PARTS + A LIST OF TIME STAMPED STEPS FOR QUICK REFERENCE. ⬇️ ⬇️ ⬇️

▬ Disclaimer ▬▬▬▬▬▬▬▬▬▬

Please remember that this is our first van build (and our first van conversion window installation) and we're sharing our experience to provide a newbie's perspective. Please do your homework and conduct thorough research before starting your van build project.

That said, we are not professionals. The information provided on this YouTube Channel is for general information purposes only and is not a substitute for any kind of professional advice, and you should not rely solely on this information. We do not make any warranties about the completeness, reliability, and accuracy of any information presented on this YouTube Channel. Any action you take upon the information communicated is strictly at your own risk, and we will not be liable for any losses and damages in connection with the use of this YouTube Channel.

▬ Van Window Install - TABLE OF CONTENTS ▬▬▬▬▬▬

00:00 Intro
0:33 Project Overview
2:37 Step 1: Select Tools
5:54 Step 2: Transpose Cut Line
7:48 Step 3: Prep to Cut
8:55 Step 4: Cut Hole
10:24 Step 5: Debur Edges
10:38 Step 6: Test Fit Window
10:59 Step 7: Trim Edges
12:25 Step 8: Clean Up
12:46 Step 9: Add Rust Protection
13:33 Step 10: Drill Pilot Holes
14:52 Step 11: Install Window
16:14 Wrap Up

▬ Van Window Install: TOOLS & SUPPLIES ▬▬▬▬▬▬▬▬▬▬

Here's a summary of tools and parts required for our Sprinter van window install, which we've divided into categories for easy reference.

While our list is based on installing a CR Laurence T - Vent window in a Sprinter van, most of tools and supplies listed are generally applicable to installing a CR Laurence Clamp Ring Style Window.

Note: As an Amazon Associate, as well as in other affiliate partnerships, we earn from qualifying purchases.

**WINDOW
CR Laurence T-Vent Window: https://fave.co/3663SbN

**CUTTING WINDOW OPENING:

IF USING A JIGSAW
Jigsaw: https://amzn.to/3jsVMP8
Jigsaw Blade: https://amzn.to/3oaoUvK

Tools for Transposing Cutline:
Hammer: https://amzn.to/38Vn6CR
Center Punch: https://amzn.to/2KmBjyZ
Sharpie: https://amzn.to/2LPj1r4
Straight edge (to connect dots): https://amzn.to/3sYrNnk

IF USING A RECIPROCATING SAW
Reciprocating Saw: https://amzn.to/364RqZI
Reciprocated Saw Blade

**ADDITIONAL TOOLS REQUIRED

DRILLING PILOT HOLE (to start Jigsaw / Reciprocating Saw)
Drill: https://amzn.to/3sAIEfK
Step Bit: https://amzn.to/2XPieIM

LADDER
Notes: If cutting with a jigsaw and trimming and painting from the outside of the van, a step ladder is very helpful in reaching the upper part of the window opening.

Ladder: https://fave.co/394Sm2a

PROTECTING VAN (during cutting and trimming)
Painters Tape: https://amzn.to/34j9iOP
Plastic sheeting (like painter’s plastic): https://amzn.to/398bJY8
Cardboard (protect walls in case metals falls out)

TRIMMING (if Required)

IF USING A DREMEL TOOL
Dremel Tool: https://amzn.to/3oVUmPA
Dremel Grinding Wheel: https://amzn.to/2LKGxVT

IF USING A GRINDER
Grinder: https://amzn.to/39Y4P6W
Grinding Wheel (for metal)

CLEAN-UP
Flat Metal File: https://amzn.to/3sBvy1R
Vacuum/Shop Vac
Bucket and Clean Rag

PRIME BARE METAL EDGES
Primer Paint: https://amzn.to/3qACzOF
Small Foam Brush: https://amzn.to/3qu8T5I
Mineral Spirits: https://amzn.to/39KbNwn

WINDOW INSTALLATION (for Clamp-on Windows)
Note: You’ll need a Philips Head screw driver at the very least to install the self-tapping screws. If drilling pilot holes first, you’ll also need an Impact Driver.

IF DRILLING PILOT HOLES (in Window)
Philips Head screwdriver: https://amzn.to/2LXnKGT
Drill: https://amzn.to/3bPh6wX
3/32 Drill Bit: https://amzn.to/3bNvUMJ
4 Pistol Grip Clamps: https://amzn.to/33nEaOJ
Impact Driver: https://amzn.to/2N5vNBM

IF USING A SCREW DRIVER (No Pilot Holes)
Philips Head screwdriver: https://amzn.to/2LXnKGT

BASIC SAFETY:
Eye protection: https://amzn.to/35Niz32
Ear protection: https://amzn.to/3ikKhJP
Mask: https://amzn.to/3inL6RW
Work Gloves: https://amzn.to/3swG0Yd
Rubber Gloves: https://amzn.to/2NfT0Bx

▬ Social Media ▬▬▬▬▬▬▬▬▬▬

Follow us on Instagram: https://www.instagram.com/wander.libre
Like our page on Facebook: https://www.facebook.com/wanderlibre
Visit our website: https://www.wanderlibre.com



#vanlife #vanbuild #sprintervan